Specify the purchase duty
An IBC offer changes the handling unit, not the need to qualify the flocculant. A buyer should connect the exact formulation to usable inversion, calibrated delivery and site storage. Do not assume every emulsion can use the incumbent powder equipment or the same liquid handling procedure.
Keep the wastewater source, supplied product identity and required separation result together. An application name narrows the enquiry but does not establish a universal grade or dose.
Identify the actual liquid product
Obtain code, active-basis definition, density where needed, preparation instructions and current SDS. Ask which properties and storage conditions are grade-specific.
Do not treat total solids, formulation viscosity and active polymer as interchangeable purchasing quantities.
Confirm the inversion and feed route
Review available water, neat metering, contact and aging arrangement, dilution and peak feed requirement. Compare activated solution and the actual separator result before approval.
Use the make-down controls to identify what must change rather than assuming an IBC is a direct connection to any existing day tank.
Agree container and stock responsibilities
Confirm offered net content, seals, discharge connections, unloading and storage instructions. Define any container return or disposal scope and lot segregation with the supplier and site.
Use actual handling guidance instead of universal claims about agitation, freezing recovery or shelf life. A package convenience does not remove product-specific safety and quality requirements.
Read a conflicting trial result
A liquid candidate can look economical by container price yet exceed the installed inversion or transfer capacity at peak load. Include the required equipment and operating scope before making a form-conversion purchase.
Repeat the reference and leading conditions when differences are close to sampling or measurement variability. Keep untested conditions visible in the qualification rather than extending one favorable observation.
Agree the acceptance record
| Buying check | Evidence | Acceptance |
|---|---|---|
| Product | Code, fraction and density basis | Comparable formulation |
| Activation | Water and required delivery range | Usable prepared polymer |
| IBC | Connections, storage and lot control | Manageable supply unit |
Retain the coded sample, preparation, active basis and measurement timing. Preserve failed conditions alongside the accepted range so later deliveries can be compared with the actual evidence.
Request the relevant sample or offer
Send the existing preparation system, water supply, demand range and container-handling constraints. Request an identified IBC offer with inversion exceptions, storage instructions and commercial responsibilities stated.
Send the flocculant sample and quotation request and review product and supply requirements with Gongyi Xinqi Polymer Co., Ltd.. Confirm the offered identity, documents and commercial scope before ordering.

