Specify the purchase duty
An offer per kilogram of powder and an offer per tonne of emulsion describe different purchased quantities. Before ranking prices, ask what the concentration statement measures and which product code it belongs to. Apparent low cost can disappear when active basis or required consumption is different.
Keep the wastewater source, supplied product identity and required separation result together. An application name narrows the enquiry but does not establish a universal grade or dose.
Define the quoted concentration
Ask whether the percentage means active polymer, a particular solids test or a typical formulation description. Obtain the method and whether the value is contractual. Do not equate total solids with active polymer without a stated relationship.
Keep unresolved concentration claims as offer questions rather than using optimistic assumptions in the bid table.
Align the commercial units
Compare net mass, currency, package, destination and delivery term. Delivered cost per active kilogram is delivered cost per product kilogram divided by the agreed active fraction. Include supported density when a liquid is metered by volume.
The supplier RFQ record keeps these terms connected to the trial and monthly quantities.
Apply the accepted consumption
Use measured active demand at the same wastewater and separator result. For a liquid-stream dose D mg/L and active cost C per kg, chemical cost per m³ is D × C / 1000. Sludge duties require a consistent dry-solids denominator instead.
Review preparation losses, sludge handling and downstream effects separately. A cheaper active kilogram does not establish the lowest accepted treatment cost.
Read a conflicting trial result
A low-active-price candidate can still need substantially more active polymer to achieve the same capture and sludge handling. Compare accepted consumption before presenting a product-price reduction as a plant saving.
Repeat the reference and leading conditions when differences are close to sampling or measurement variability. Keep untested conditions visible in the qualification rather than extending one favorable observation.
Agree the acceptance record
| Buying check | Evidence | Acceptance |
|---|---|---|
| Basis | Definition and concentration method | Comparable active quantities |
| Delivery | Mass, package and destination | Like-for-like quotation |
| Duty | Dose at accepted output | Treatment cost established |
Retain the coded sample, preparation, active basis and measurement timing. Preserve failed conditions alongside the accepted range so later deliveries can be compared with the actual evidence.
Request the relevant sample or offer
Send the offers, product data, calibrated usage, wastewater condition and accepted result. Request a transparent comparison showing assumptions and missing information rather than an unsupported precise saving.
Send the flocculant sample and quotation request and review product and supply requirements with Gongyi Xinqi Polymer Co., Ltd.. Confirm the offered identity, documents and commercial scope before ordering.

